Thread locker

Low strength,thixotropic viscosity.

ProductNumber	Container	Color	Viscosity(mPa.s)	Prevail torque(N.m)	Break Torque(N.m)	Gap fill(mm)	Temperature range(°C)	Fixture time/Full cure time
222	10ml/50ml/250ml	Purple	1200/5000	4	6	0.13	-50~150	20min/24hrs
242	10ml/50ml/250ml	Blue	1200/6000	4.8	12	0.13	-50~150	20min/24hrs
243	10ml/50ml/250ml	Blue	2250/8000	7	20	0.13	-50~150	20min/24hrs
262	10ml/50ml/250ml	Red	1800/5000	22	22	0.13	-50~150	20min/24hrs
271	10ml/50ml/250ml	Red	500	31	25	0.13	-50~150	20min/24hrs
272	10ml/50ml/250ml	Red	6000	25	23	0.25	-50~150	30min/24hrs
277	10ml/50ml/250ml	Red	7000	32	32	0.25	-50~150	30min/24hrs
290	10ml/50ml/250ml	Green	12	29	10	0.1	-50~150	20min/24hrs
222 Threadlocking adhesiveLow strength,thixotropic viscosity.,Suitable for most metal surfaces,Parts can be disassemble with hand tools.Ideals for fasteners diameters of M6 and smaller,controlled lubricity can attain accurate clamp loads.242 Threadlockong adhesiveMedium strengthGeneral purpose,thixotropic viscosity.For locking and sealing M6-M20 threads.Parts can be separated using hand tools,controlled lubricity,can attain accurate clamp loads.243 Threadlocking adhesiveOil resistant,medium strengthFast curing,used on inert surface,improved oil tolerant,easy to disassemble,can be applied on surfaces with oil For fasteners smaller than M20262 Threadlocking adhesiveMedium to high strength Thixotropic viscosity,excellent chemicals resistance.Suitable for most metal surfaces, for fasteners smaller than M20.A permanent threadlocker,Excellent for preventing rust and corrosion in extreme chemical/environmental conditions.271 Threadlocking adhesiveHigh strength,low viscosity.For permanent locking and sealing,fasteners smaller than M36Heating and tools required for disassemble.272 Threadlocking adhesiveHigh temperature,high strengthWithstands temperatures up to 230For locking and sealing the thread of cylinder without being cleaned.Provides a fast cure on most surfaces,including’s received asteners .Recommended for bolts up to M36.Heating and hand tools required for disassemble277 Threadlocking adhesiveHigh strengthHigh viscosity,excellent chemicals resistance.For permanent locking and sealing bolts up to M36Prevent rust and corrosion of threaded fasteners.Heating and hand tools required for disassemble.290 Threadlocking adhesiveWicking gradeMedium strength,low viscosity,fast curing.For locking and sealing pre-assembled bolts M2-M12.Also for sealing welds and porous metal parts.Prevent rust and corrosion.Heating and tools required for disassemble.

Thread locker